Product tours · ABR HLS Transcoder
Every channel and every quality, on one screen.
Follow the transcoder from its main screen to one channel's ladder, and what you can set at every step.
A ladder per channelH.264 or AV1HLS outHardware encode

Step 01 · Main screen
Every channel live, with its ladder.
Each channel shows its live picture, its input and every quality it produces, with how recently each one delivered a segment. Above them, how busy each media card is.
- Every rendition with its resolution, bitrate and state
- Load of the decoder, scaler and encoders on each card
- The HLS address of each channel, ready to copy
- Stop, restart, logs, edit and copy on every channel
ABR HLS Transcoder · Main screen
- Every channel
- Live pictureEvery quality's stateHLS address
- Every card
- DecoderScalerEncoder load
- Actions
- StopRestartLogsEditCopy
Step 02 · Set up a channel
Build the ladder you need.
A channel is one input, decoded once and turned into every quality you list. Start from a preset or set each rendition yourself.
- Input over UDP, unicast or multicast
- Each rendition's size, codec, video and audio bitrate
- Presets for a quick start
- GOP and segment length, and which card does the work
ABR HLS Transcoder · Set up a channel
- Input
- UDP, unicast or multicast
- Ladder
- 1080p720p480p272p
- Codec
- H.264AV1
- Output
- HLS
- Tuning
- PresetsGOPSegment lengthCard
Click through it yourself.
Remote access to a running unit first, so you can try every setting on this page yourself. Then a unit on your own signal, with a written report you keep either way.