Every output, on one screen, in a browser.
Follow the SDI Decoder from its main screen to one output's input, picture and sound, and what you can set at every step.

Every output at a glance.
The main screen lists every SDI output with what it plays, where it goes and how long it has been running. Above them, the unit's own health.
- One row per output, with its state and running time
- Start, stop, restart, preview, log and settings on every row
- CPU, GPU, memory, network and temperature in one bar
- A count of what runs and what is stopped
- Outputs
- Up to 16 × 3G-SDI
- Every output
- StateRunning timePreviewLogSettings
- Health
- CPUGPUMemoryTemperaturesNetwork
Any stream in, or a file, or colour bars.
Each output takes its own input. Pick the kind, fill in where it comes from, and the output plays it.
- UDP, RTP, SRT, RIST, RTMP, RTSP, HLS or HTTP
- A file in a seamless loop, or a built-in test pattern
- SRT as caller or listener, with latency and AES encryption
- Low-latency or normal-quality buffering per output
- Stream
- UDPRTPSRTRISTRTMPRTSPHLSHTTP
- Or
- File in a loopTest pattern
- SRT
- CallerListenerAES encryption
- Buffering
- Low latencyNormal quality
The picture your plant expects.
Choose the SDI connector and the video mode. Outputs that belong together can be lined up by their timecode, so they reach the vision mixer in step.
- SD, HD and 3G-SDI, interlaced or progressive
- Deinterlace when a progressive output is needed
- Align with the other outputs by timecode
- Each output on its own connector
- Format
- SDHD3G-SDI
- Scan
- InterlacedProgressive
- Options
- DeinterlaceAlign outputs by timecode
The sound, where the router wants it.
By default every audio channel the stream carries goes out embedded on the SDI, in order. Untick it to place each channel on the pair you choose.
- Up to 16 audio channels embedded
- Automatic, or each channel placed by hand
- The incoming tracks listed with their channel count
- Embedded
- Up to 16 channels
- Mapping
- Automatic, in orderEach channel by hand
Click through it yourself.
Remote access to a running unit first, so you can try every setting on this page yourself. Then a unit on your own signal, with a written report you keep either way.